Long-Term Winter Inversion Properties in a Mountain Valley of the Western United States and Implications on Air Quality

Because of the geography of a narrow valley and surrounding tall mountains, Cache Valley (located in northern Utah and southern Idaho) experiences frequent shallow temperature inversions that are both intense and persistent. Such temperature inversions have resulted in the worst air quality in the nation. In this paper, the historical properties of Cache Valley’s winter inversions are examined by using two meteorological stations with a difference in elevation of approximately 100 m and a horizontal distance apart of ~4.5 km. Differences in daily maximum air temperature between two stations were used to define the frequency and intensity of inversions. Despite the lack of a long-term trend in inversion intensity from 1956 to present, the inversion frequency increased in the early 1980s and extending into the early 1990s but thereafter decreased by about 30% through 2013. Daily mean air temperatures and inversion intensity were categorized further using a mosaic plot. Of relevance was the discovery that after 1990 there was an increase in the probability of inversions during cold days and that under conditions in which the daily mean air temperature was below −15°C an inversion became a certainty. A regression model was developed to estimate the concentration of past particulate matter of aerodynamic diameter ≤ 2.5 μm (PM2.5). The model indicated past episodes of increased PM2.5 concentrations that went into decline after 1990; this was especially so in the coldest of climate conditions

Increasing water cycle extremes in California and in relation to ENSO cycle under global warming

Since the winter of 2013–2014, California has experienced its most severe drought in recorded history, causing statewide water stress, severe economic loss and an extraordinary increase in wildfires. Identifying the effects of global warming on regional water cycle extremes, such as the ongoing drought in California, remains a challenge. Here we analyse large-ensemble and multi-model simulations that project the future of water cycle extremes in California as well as to understand those associations that pertain to changing climate oscillations under global warming. Both intense drought and excessive flooding are projected to increase by at least 50% towards the end of the twenty-first century; this projected increase in water cycle extremes is associated with a strengthened relation to El Niño and the Southern Oscillation (ENSO)—in particular, extreme El Niño and La Niña events that modulate California’s climate not only through its warm and cold phases but also its precursor patterns

Estimating Actual Evapotranspiration from Stony-Soils in Montane Ecosystems

Quantification of evapotranspiration (ET) is crucial for understanding the water balance and for efficient water resources planning. Agricultural settings have received most attention regarding ET measurements while less knowledge is available for actual ET (ETA) in natural ecosystems, many of which have soils containing significant amounts of stones. This study is focused on modelling ETA from stony soil, particularly in montane ecosystems where we estimate the contribution of stone content on water retention properties in soil. We employed a numerical model (HYDRUS-1D) to simulate ETA in natural settings in northern Utah and southern Idaho during the 2015 and 2016 growing seasons based on meteorological and soil moisture measurements at a range of depths. We simulated ETA under three different scenarios, considering soil with (i) no stones, (ii) highly porous stones, and (iii) negligibly porous stones. The simulation results showed significant overestimation of ETA when neglecting stones in comparison to ETA measured by eddy covariance. ETA estimates with negligibly porous stones were lower for all cases due to the decrease in soil water storage compared with estimates made considering highly porous stones. Assumptions of highly porous or negligibly porous stones led to reductions in simulated ETA of between 10% and 30%, respectively, compared with no stones. These results reveal the important role played by soil stones, which can impact the water balance by altering available soil moisture and thus ETA in montane ecosystems

Empirical and Modeling Analyses of the Circulation Influences on California Precipitation Deficits

Amplified and persistent ridges in western North America are recurring features associated with drought conditions in California. The recent drought event (2012–2016) lasted through both La Niña and El Niño episodes, suggesting additional climate drivers are important in addition to the commonly perceived El Niño-Southern Oscillation. Diagnostic analyses presented here suggest that, while the Pacific North American (PNA) and North Pacific Oscillation (NPO) do not directly cause drought in California, the relationships between them and with the upper air circulation pattern do modulate the spatial drought pattern. The positive PNA relative circulation leads drier northern California, and (-NPO) relative circulation leads southern California to be drier. The types of drought in this region emerge mostly from the combination of two PNA and NPO relative oceanic and atmospheric oscillations. At present, climate model projections do not indicate any significant change in these particular drought-modulating processes

Intercomparison of Nine Micrometeorological Stations during the BEAREX08 Field Campaign

Land–atmosphere interactions play a critical role in regulating numerous meteorological, hydrological, and environmental processes. Investigating these processes often requires multiple measurement sites representing a range of surface conditions. Before these measurements can be compared, however, it is imperative that the differences among the instrumentation systems are fully characterized. Using data collected as a part of the 2008 Bushland Evapotranspiration and Agricultural Remote Sensing Experiment (BEAREX08), measurements from nine collocated eddy covariance (EC) systems were compared with the twofold objective of 1) characterizing the interinstrument variation in the measurements, and 2) quantifying the measurement uncertainty associated with each system. Focusing on the three turbulent fluxes (heat, water vapor, and carbon dioxide), this study evaluated the measurement uncertainty using multiple techniques. The results of the analyses indicated that there could be substantial variability in the uncertainty estimates because of the advective conditions that characterized the study site during the afternoon and evening hours. However, when the analysis was limited to nonadvective, quasi-normal conditions, the response of the nine EC stations were remarkably similar. For the daytime period, both the method of Hollinger and Richardson and the method of Mann and Lenschow indicated that the uncertainty in the measurements of sensible heat, latent heat, and carbon dioxide flux were approximately 13 W m‒2, 27 W m‒2, and 0.10 mg m‒2 s‒1, respectively. Based on the results of this study, it is clear that advection can greatly increase the uncertainty associated with EC flux measurements. Since these conditions, as well as other phenomena that could impact the measurement uncertainty, are often intermittent, it may be beneficial to conduct uncertainty analyses on an ongoing basis

Influence of wind direction on the surface roughness of vineyards

Remote sensing-based models are the most viable means of collecting the high-resolution spatially distributed estimates of evaporative water loss needed to manage irrigation and ensure the effective use of limited water resources. However, due to the unique canopy structure and configuration of vineyards, these models may not be able to adequately describe the physical processes driving evapotranspiration from vineyards. Using data collected from 2014 to 2016 as a part of the Grape Remote sensing Atmospheric Profile and Evapotranspiration Experiment (GRAPEX), the twofold objective of this study was to (1) identify the relationship between the roughness parameters, zero-plane displacement height (do) and roughness length for momentum (zo), and local environmental conditions, specifically wind direction and vegetation density and (2) determine the effect of using these relationships on the ability of the remote sensing-based Two-Source Energy Balance (TSEB) model to estimate the sensible (H) and latent (λE) heat fluxes. Although little variation in do was identified during the growing season, a well-defined sigmoidal relationship was observed between zo and wind direction. When the output from a version of the TSEB model incorporating these relationships (TSEBVIN) was compared to output from the standard model (TSEBSTD), there were large changes to the roughness parameters, particularly zo, but only modest changes in the turbulent fluxes. When the output from TSEBVIN was compared to that of a version using a parameterization scheme representing open canopies (TSEBOPN), the mean absolute difference between the estimates of do and zo were 0.44 m and 0.25 m, respectively. While these values represent differences in excess of 45%, the turbulent fluxes differed by just 13 W m−2 or 10%, on average. The results suggest that the TSEB model is largely insensitive to changes in the roughness parameters for the range in roughness values evaluated in this study. This also suggests that the requirement for highly accurate roughness values has limited utility in the application of the TSEB model in vineyard systems. Since there is no significant advantage to using the more complex TSEBOPN and TSEBVIN models, it is recommended that the standard model be used.info:eu-repo/semantics/acceptedVersio

Tower and Aircraft Eddy Covariance Measurements of Water Vapor, Energy, and Carbon Dioxide Fluxes during SMACEX

Abstract A network of eddy covariance (EC) and micrometeorological flux (METFLUX) stations over corn (Zea mays L.) and soybean [Glycine max (L.) Merr.] canopies was established as part of the Soil Moisture–Atmosphere Coupling Experiment (SMACEX) in central Iowa during the summer of 2002 to measure fluxes of heat, water vapor, and carbon dioxide (CO2) during the growing season. Additionally, EC measurements of water vapor and CO2 fluxes from an aircraft platform complemented the tower-based measurements. Sensible heat, water vapor, and CO2 fluxes showed the greatest spatial and temporal variability during the early crop growth stage. Differences in all of the energy balance components were detectable between corn and soybean as well as within similar crops throughout the study period. Tower network–averaged fluxes of sensible heat, water vapor, and CO2 were observed to be in good agreement with area-averaged aircraft flux measurements

Incorporation of Unmanned Aerial Vehicle (UAV) Point Cloud Products into Remote Sensing Evapotranspiration Models

In recent years, the deployment of satellites and unmanned aerial vehicles (UAVs) has led to production of enormous amounts of data and to novel data processing and analysis techniques for monitoring crop conditions. One overlooked data source amid these efforts, however, is incorporation of 3D information derived from multi-spectral imagery and photogrammetry algorithms into crop monitoring algorithms. Few studies and algorithms have taken advantage of 3D UAV information in monitoring and assessment of plant conditions. In this study, different aspects of UAV point cloud information for enhancing remote sensing evapotranspiration (ET) models, particularly the Two-Source Energy Balance Model (TSEB), over a commercial vineyard located in California are presented. Toward this end, an innovative algorithm called Vegetation Structural-Spectral Information eXtraction Algorithm (VSSIXA) has been developed. This algorithm is able to accurately estimate height, volume, surface area, and projected surface area of the plant canopy solely based on point cloud information. In addition to biomass information, it can add multi-spectral UAV information to point clouds and provide spectral-structural canopy properties. The biomass information is used to assess its relationship with in situ Leaf Area Index (LAI), which is a crucial input for ET models. In addition, instead of using nominal field values of plant parameters, spatial information of fractional cover, canopy height, and canopy width are input to the TSEB model. Therefore, the two main objectives for incorporating point cloud information into remote sensing ET models for this study are to (1) evaluate the possible improvement in the estimation of LAI and biomass parameters from point cloud information in order to create robust LAI maps at the model resolution and (2) assess the sensitivity of the TSEB model to using average/nominal values versus spatially-distributed canopy fractional cover, height, and width information derived from point cloud data. The proposed algorithm is tested on imagery from the Utah State University AggieAir sUAS Program as part of the ARS-USDA GRAPEX Project (Grape Remote sensing Atmospheric Profile and Evapotranspiration eXperiment) collected since 2014 over multiple vineyards located in California. The results indicate a robust relationship between in situ LAI measurements and estimated biomass parameters from the point cloud data, and improvement in the agreement between TSEB model output of ET with tower measurements when employing LAI and spatially-distributed canopy structure parameters derived from the point cloud data

Lidar Based Emissions Measurement at the Whole Facility Scale: Method and Error Analysis

Particulate emissions from agricultural sources vary from dust created by operations and animal movement to the fine secondary particulates generated from ammonia and other emitted gases. The development of reliable facility emission data using point sampling methods designed to characterize regional, well-mixed aerosols are challenged by changing wind directions, disrupted flow fields caused by structures, varied surface temperatures, and the episodic nature of the sources found at these facilities. We describe a three-wavelength lidar-based method, which, when added to a standard point sampler array, provides unambiguous measurement and characterization of the particulate emissions from agricultural production operations in near real time. Point-sampled data are used to provide the aerosol characterization needed for the particle concentration and size fraction calibration, while the lidar provides 3D mapping of particulate concentrations entering, around, and leaving the facility. Differences between downwind and upwind measurements provide an integrated aerosol concentration profile, which, when multiplied by the wind speed profile, produces the facility source flux. This approach assumes only conservation of mass, eliminating reliance on boundary layer theory. We describe the method, examine measurement error, and demonstrate the approach using data collected over a range of agricultural operations, including a swine grow-finish operation, an almond harvest, and a cotton gin emission study

Influence of Model Grid Size on the Estimation of Surface Fluxes Using the Two Source Energy Balance Model and sUAS Imagery in Vineyards

Evapotranspiration (ET) is a key variable for hydrology and irrigation water management,with significant importance in drought-stricken regions of the western US. This is particularly true for California, which grows much of the high-value perennial crops in the US. The advent of small Unmanned Aerial System (sUAS) with sensor technology similar to satellite platforms allows for the estimation of high-resolution ET at plant spacing scale for individual fields. However, while multiple efforts have been made to estimate ET from sUAS products, the sensitivity of ET models to different model grid size/resolution in complex canopies, such as vineyards, is still unknown.The variability of row spacing, canopy structure, and distance between fields makes this information necessary because additional complexity processing individual fields. Therefore, processing the entire image at a fixed resolution that is potentially larger than the plant-row separation is more efficient.From a computational perspective, there would be an advantage to running models at much coarser resolutions than the very fine native pixel size from sUAS imagery for operational applications. In this study, the Two-Source Energy Balance with a dual temperature (TSEB2T) model, which uses remotely sensed soil/substrate and canopy temperature from sUAS imagery, was used to estimate ET and identify the impact of spatial domain scale under different vine phenological conditions. The analysis relies upon high-resolution imagery collected during multiple years and times by the Utah State University Aggie Air TM sUAS program over a commercial vineyard located near Lodi, California.This project is part of the USDA-Agricultural Research Service Grape Remote Sensing Atmospheric Profile and Evapotranspiration eXperiment (GRAPEX). Original spectral and thermal imagery data from sUAS were at 10 cm and 60 cm per pixel, respectively, and multiple spatial domain scales (3.6, 7.2,14.4, and 30 m) were evaluated and compared against eddy covariance (EC) measurements. Results indicated that the TSEB2T model is only slightly affected in the estimation of the net radiation (Rn) and the soil heat flux (G) at different spatial resolutions, while the sensible and latent heat fluxes (HandLE, respectively) are significantly affected by coarse grid sizes. The results indicated overestimation of H and underestimation of LE values, particularly at Landsat scale (30 m). This refers to the non-linear relationship between the land surface temperature (LST) and the normalized difference vegetation index (NDVI) at coarse model resolution. Another predominant reason for LE reduction in TSEB2T was the decrease in the aerodynamic resistance (Ra), which is a function of the friction velocity (u∗)that varies with mean canopy height and roughness length. While a small increase in grid size can be implemented, this increase should be limited to less than twice the smallest row spacing present in the sUAS imagery. The results also indicated that the mean LE at field scale is reduced by 10% to 20% at coarser resolutions, while the with-in field variability in LE values decreased significantly at the larger grid sizes and ranged between approximately 15% and 45%. This implies that, while the field-scale values of LE are fairly reliable at larger grid sizes, the with-in field variability limits its use for precision agriculture applications